WPS500X Pressure Transducer Maxi Kit – PQ038
$1,873.00
Get the WPS500X – the very best pressure transducer you can buy – with all of the hoses, adapters, and accessories you will need to perform in-cylinder compression tests, as well as fuel, exhaust, and manifold pressure tests. This kit contains everything found in the standard kit, plus a wide range of additional adapters for just about any application imaginable.
Description
This kit includes the WPS500X pressure transducer, the following accessories found in the standard kit:
- PA094 WPS500X compression adaptor carry case
- TA081 USB charging cable for the WPS500X
- TA083 Fuel hose for WPS500, large Schrader
- TA085 Vacuum hose for WPS500 pressure transducer
- TA086 Bleed hose for WPS500 pressure transducer
- TA087 Exhaust adaptor for WPS500 pressure transducer
- TA117 Fuel hose for WPS500, small Schrader
- TA129 Universal vacuum adaptor
- TA130 BNC 5m to BNC cable
- TA142 Foster 2 series quick coupler female to ¼ NPT male
- TA212 Standard compression hose for WPS 500
- TA213 Adaptor M10 short reach
- TA216 Adaptor M12 deep reach
- TA217 Adaptor M14 short reach
- TA218 Adaptor M14 deep reach
Plus these additional accessories:
- TA130 Cable: insulated BNC to insulated BNC 5m
- TA214 Adaptor M10 deep reach
- TA219 Adaptor M16 Ford Triton
- TA220 Adaptor M18
- PP970 Adaptor kit A (Foster series 12)
- PP972 Vacuum tap for WPS500 (brass)
- PP973 Fuel hose pressure tap: small (brass)
- PP974 Fuel hose pressure tap: medium (brass)
- TA250 WPS500X Adaptor Kit B
The WPS500X is an impressive pressure transducer. It covers a wide pressure range that would normally require multiple transducers. It produces a signal that will result clear, accurate, and highly resolute waveforms, allowing for detailed analysis of your readings.
While you will certainly find other pressure transducers at lower prices, you will quickly be disappointed when you start comparing their performance to that of the WPS500X.
Range | Pressure range | Accuracy | Response time | Output scaling |
---|---|---|---|---|
1 | –15 to 500 psi –1 to 34.47 bar |
1% of scale | 100 µs | 10 mV/1 psi (500 psi = 5 V) |
2 | –15 to 50 psi –1 to 3.45 bar |
1% of scale | 100 µs | 100 mV/1 psi (50 psi = 5 V) |
3 | –5 to 5 psi –0.34 to 0.34 bar |
5% of scale | filtered | 1 V/1 psi (5 psi = 5 V) |
Three pressure ranges = performance and versatility
The three pressure ranges of the WPS500X allow accurate measurement and analysis of many automotive pressures including cylinder compression, fuel pressure, intake manifold vacuum and even pulses from the exhaust.
Range 1
The first range gives you high resolution and accuracy for high-pressure tests such as cranking and running cylinder compression or fuel pressure testing. Not only is this test a great way for you to find compression issues, but it is also an excellent way for you to identify cam timing issues such as jumped timing belts and stretched timing chains — this is especially useful on multi-cam engines that may not have a cam sensor on each camshaft.
Range 2
The second range measures from –15 to 50 psi (approximately –1 to 3.45 bar). This range is ideal for vacuum tests and fuel system tests. When testing these systems you will find the zoom function is especially useful as it makes it easy to analyze the valves operating with the vacuum waveform, or the injectors through the fuel waveform.
Range 3
With the third range you can measure –5 to 5 psi (approximately –0.34 to 0.34 bar). This setting is sensitive enough to allow you to analyze small pressures or pulses such as pulses from the exhaust.
When would I use the WPS500X?
Often, problems reported by customers can have many potential causes, and simply reading fault codes leaves you no closer to a solution. In addition to the comprehensive electrical testing provided by PicoScope, the addition of a WPS500X provides you with that same detailed insight into the engine system for accurate diagnosis of common problems such as:
- No start
- Loss of power
- Misfire
- Stalling
- Engine noise
- Emissions fault
- Backfire
With the unparalleled resolution and accuracy of the WPS500X Automotive Pressure Transducer you can perform quick and accurate pressure analysis on many automotive systems.
- Accurately measure up to 500 psi (34 bar)
- Ultra-fast 100 µs response time
- Zoom function for enhanced analysis capabilities
- Internal rechargeable LiPo battery
- Integrated pressure relief / bleed-off valve
- Auto zeroing
- High noise immunity
- Temperature compensated
The WPS500X features an extremely fast 100 µs response time from 0% to 90% of full scale and sensitivity down to about 0.07 psi (5 mbar). This provides you with an accurate representation of rapidly changing signals that span a broad pressure range.
Use the WPS500X with PicoScope to reveal how your engine is actually performing with minimal intrusion. Compression, airflow, valve timing and back pressure can all be measured in one hit.